Deep Groove Ball Bearing >> 6000 Series < Online Inquiry >
Features
The bearings are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.
Applications
The bearings can be found in automobiles, machine tools, motors, instruments, construction machines, railway vehicles, agricultural machines and various other special machines.
Types
Basic type; With snap ring groove on the outer ring (-N); With one shield (-Z) on one side or two shields (-2Z) on both sides; With one seal (-RS) on one side or two seals (-2RS) on both sides.

 

Bearing No.

Boundary dimensions

Basic load ratings (kN)

Limiting speed

Mass

mm

Dynamic

Static

rpm

Kg

d

D

B

rs min

Cr

Cor

Grease

Oil

6000

10

26

8

0.3

4.58

1.98

29000

34000

0.019

6001

12

28

8

0.3

5.1

2.38

26000

30000

0.022

6002

15

32

9

0.3

5.58

2.85

22000

26000

0.031

6003

17

35

10

0.3

6

3.25

20000

24000

0.040

6004

20

42

12

0.6

9.38

5.02

18000

21000

0.068

6005

25

47

12

0.6

10

5.85

15000

18000

0.078

6006

30

55

13

1

13.2

8.3

13000

15000

0.110

6007

35

62

14

1

16.2

10.5

12000

14000

0.148

6008

40

68

15

1

17.2

11.8

10000

12000

0.185

6009

45

75

16

1

21

14.8

9200

11000

0.230

6010

50

80

16

1

22

16.2

8400

9800

0.258

6011

55

90

18

1.1

30.2

21.8

7700

9000

0.362

6012

60

95

18

1.1

31.5

24.2

7000

8300

0.385

6013

65

100

18

1.1

30.5

25.2

6500

7700

0.435

6014

70

110

20

1.1

38.1

30.9

6100

7100

0.602

6015

75

115

20

1.1

39.6

33.5

5700

6700

0.638

6016

80

125

22

1.1

47.6

39.8

5300

6200

0.850

6017

85

130

22

1.1

49.5

43.1

5000

5900

0.890

6018

90

140

24

1.5

58.2

49.7

4700

5600

1.160

6019

95

145

24

1.5

60.4

53.9

4500

5300

1.210

6020

100

150

24

1.5

60.2

54.2

4200

5000

1.250

6021

105

160

26

2

72.3

65.8

4000

4700

1.590

6022

110

170

28

2

82

73

3800

4500

1.960

6024

120

180

28

2

85

79.5

3500

4100

2.070

6026

130

200

33

2

106

101

3200

3800

3.160

6028

140

210

33

2

110

109

3000

3500

3.350

6030

150

225

35

2.1

126

126

2800

3200

4.080

6032

160

240

38

2.1

143

144

2600

3000

5.050

6034

170

260

42

2.1

168

172

2400

2800

6.760

6036

180

280

46

2.1

189

199

2300

2700

8.800

6038

190

290

46

2.1

197

215

2100

2500

9.180

6040

200

310

51

2.1

218

243

2000

2400

11.900

<Back>   <Online Inquiry>