Deep Groove Ball Bearing >> Miniature Series < Online Inquiry >
Features
The bearings are the most typical rolling bearings with extensive applications. The raceways in both of the rings are in arc groove form, which can carry radial and axial load in double directions. They can be applied in situations where high-rotating speed and low noise and low vibration are required.
Applications
The bearings can be found in automobiles, machine tools, motors, instruments, construction machines, railway vehicles, agricultural machines and various other special machines.
Types
Basic type; With snap ring groove on the outer ring (-N); With one shield (-Z) on one side or two shields (-2Z) on both sides; With one seal (-RS) on one side or two seals (-2RS) on both sides.

Bearing No.

Boundary dimensions

Basic load ratings (kN)

Limiting speed

Mass

mm

Dynamic

Static

rpm

g

d

D

B

rs min

Cr

Cor

Grease

Oil

60/1.5

1.5

6

2.5

0.15

274

86

71,000

84,000

0.350

602

2

7

2.8

0.15

380

125

62,000

73,000

0.540

60/2.5

2.5

8

2.8

0.15

550

174

56,000

66,000

0.720

603

3

9

3

0.15

635

219

50,000

59,000

0.920

604

4

12

4

0.2

970

360

43,000

51,000

2.100

605

5

14

5

0.2

1,330

505

39,000

46,000

3.500

606

6

17

6

0.3

2,190

865

35,000

42,000

6.000

607

7

19

6

0.3

2,240

910

34,000

40,000

8.000

608

8

22

7

0.3

3,350

1,400

32,000

37,000

12.000

609

9

24

7

0.3

3,400

1,450

31,000

36,000

14.000

 

 

 

 

 

 

 

 

 

 

623

3

10

4

0.15

640

224

50,000

58,000

1.600

624

4

13

5

0.2

1,310

490

42,000

49,000

3.200

625

5

16

5

0.3

1,760

680

37,000

44,000

4.800

626

6

19

6

0.3

2,340

885

34,000

40,000

8.100

627

7

22

7

0.3

3,350

1,400

32,000

37,000

13.000

628

8

24

8

0.3

4,000

1,590

31,000

36,000

17.000

629

9

26

8

0.6

4,550

1,960

30,000

35,000

20.000

 

 

 

 

 

 

 

 

 

 

67/2.5

2.5

5

1.5

0.08

153

59

70,000

82,000

0.110

673

3

6

2

0.08

242

94

60,000

71,000

0.200

674

4

7

2

0.08

222

88

54,000

63,000

0.280

675

5

8

2

0.08

217

91

49,000

57,000

0.320

676

6

10

2.5

0.1

465

196

43,000

51,000

0.650

677

7

11

2.5

0.1

555

269

40,000

47,000

0.670

678

8

12

2.5

0.1

515

252

38,000

45,000

0.750

679

9

14

3

0.1

920

465

36,000

42,000

1.400

 

 

 

 

 

 

 

 

 

 

681

1

3

1

0.05

80

22

120,000

140,000

0.050

68/1.5

1.5

4

1.2

0.15

102

29

88,000

100,000

0.070

682

2

5

1.5

0.08

171

51

74,000

87,000

0.130

68/2.5

2.5

6

1.8

0.08

209

73

65,000

76,000

0.220

683

3

7

2

0.1

390

130

58,000

68,000

0.330

684

4

9

2.5

0.15

640

224

49,000

57,000

0.670

685

5

11

3

0.15

715

282

43,000

51,000

1.100

686

6

13

3.5

0.15

1,080

440

39,000

46,000

1.900

687

7

14

3.5

0.15

1,170

505

37,000

44,000

2.100

688

8

16

4

0.2

1,610

715

35,000

41,000

3.100

689

9

17

4

0.2

1,720

820

33,000

39,000

3.200

 

 

 

 

 

 

 

 

 

 

691

1

4

1.6

0.1

157

43

96,000

110,000

0.110

69/1.5

1.5

5

2

0.15

171

51

79,000

93,000

0.180

692

2

6

2.3

0.15

279

89

67,000

79,000

0.310

69/2.5

2.5

7

2.5

0.15

284

96

59,000

70,000

0.430

693

3

8

3

0.15

560

180

54,000

63,000

0.610

694

4

11

4

0.15

715

276

45,000

52,000

1.800

695

5

13

4

0.2

1,080

430

40,000

47,000

2.400

696

6

15

5

0.2

1,350

530

37,000

44,000

3.800

697

7

17

5

0.3

1,610

715

35,000

41,000

5.200

698

8

19

6

0.3

1,990

865

33,000

39,000

7.300

699

9

20

6

0.3

2,480

1,090

32,000

38,000

8.200

<Back>   <Online Inquiry>