Angular Contact Ball Bearing >> 7000C Series < Online Inquiry >
Features
Individual bearings of this type are capable of taking radial loads and also axial loads in one direction. Four contact angles of 15¡ã, 25¡ã, 30¡ã, and 40¡ã are available. The larger the contact angle, the higher the axial load capacity. For high-speed operation, however, the smaller contact angles are preferred. Usually, two bearings are used in duplex pairs, and the clearance between them must be adjusted properly.
Pressed steel cages are commonly used, however, for high precision bearings with a contact angle less than 30¡ã, polyamide resin cages are often used.
Applications
These bearings are mainly applied in the machine tool spindles, high-frequency motors, gas turbines, oil pumps, air compressors, printing machines and other installations.

Bearing No.

Boundary dimensions

Basic load ratings(kN)

Limiting speed

Mass

mm

Dynamic

Static

rpm

kg

d

D

B

Cr

Cor

Grease

Oil

7000C

10

26

8

4.9

2.1

24,000

32,000

0.019

7001C

12

28

8

5.4

2.6

22,000

28,000

0.021

7002C

15

32

9

6.2

3.3

19,000

25,000

0.030

7003C

17

35

10

6.6

3.6

16,000

22,000

0.040

7004C

20

42

12

10.4

6

14,000

19,000

0.064

7005C

25

47

12

11.6

7.4

12,000

17,000

0.074

7006C

30

55

13

15.1

10.2

9,500

14,000

0.110

7007C

35

62

14

18.2

12.7

8,500

12,000

0.150

7008C

40

68

15

19.7

14.9

8,000

11,000

0.180

7009C

45

75

16

25.9

20.2

7,500

10,000

0.230

7010C

50

80

16

26.6

21.8

6,700

9,000

0.250

7011C

55

90

18

38.9

29.5

6,000

8,000

0.380

7012C

60

95

18

40.9

33.1

5,600

7,500

0.400

7013C

65

100

18

40.1

35.3

5,300

7,000

0.430

7014C

70

110

20

48.3

43.1

5,000

6,700

0.600

7015C

75

115

20

49.6

45.9

4,800

6,300

0.630

7016C

80

125

22

58.9

54.7

4,500

6,000

0.850

7017C

85

130

22

58.1

55.9

4,300

5,600

0.890

7018C

90

140

24

71.7

68.7

4,000

5,300

1.150

7019C

95

145

24

73.5

73.1

3,800

5,000

1.200

7020C

100

150

24

74.4

72.5

3,800

5,000

1.250

7021C

105

160

26

80.6

81.1

3,600

4,800

1.600

7022C

110

170

28

101.4

100.3

3,400

4,600

1.950

7024C

120

180

28

108.6

110.7

2,800

3,800

2.100

7026C

130

200

33

129.4

134.7

2,600

3,400

3.330

7028C

140

210

33

153.4

160.5

2,400

3,200

3.460

7030C

150

225

35

183.9

194.2

2,200

3,000

4.800

7032C

160

240

38

200.1

219.4

2,000

2,800

5.260

<Back>   <Online Inquiry>